Carcase clamp
Typ CONCEPT 70 EASY 250
- Stock number:
- 2004-29938 TB
- Year / Condition:
- * / Gebraucht
- Control unit:
- conventional
- Country of origin:
- Freight basis:
- Item location:
- Delivery time:
Picture / documents / videos
Technical specs
Description
- NEW -
Manufacturer Ganner Gannomat
Type CONCEPT 70 EASY 250
400 V, 3 Ph, 50 Hz (1.6 kVA, 16 A)
completely in the standard version:
- Solid, torsion-free steel frame,
in welding and bolted
- Press the side beams with continuous pressure surface
with 25 mm thick, coated platen
- Counter-pressure surface (pressure side wall, floor)
25 mm thick, coated, druchgehende
platens
- Electromotive adjustment of the clamping bar
about Precision Lead Screws
(with increased pitch and concentricity)
and high-performance running nuts with grease reservoir
- The clamping is done by an electric motor, via
Worm gear motor (0.75 kW)
- The pressing force of the press bar is by
Potentiometer adjusted continuously electronically
and is controlled by frequency, so
the pressing force regulation no wear and tear
- Press force for vertical clamping bar
min. 300 daN (kg) continuously up to max. 2200 daN (kg)
- Press and adjustment of the clamping bar
with fine positioning, 3-step switch
5/10/25 mm / sec.
- Easy to operate 2 separate pushbutton,
2 movements (opening / closing) are
the control available
- Freely adjustable time delay press with automatic opening
0-30 min. (switchable seconds or hours)
- Working height / loading height 200 mm
- Work dimensions:
Length min. 150 mm, max. 1300 mm
Height min. 150 mm, max. 2500 mm
Depth 700 mm
Order no 0750A001B
ex works
- NEW -
Manufacturer Ganner Gannomat
Type CONCEPT 70 EASY 250
400 V, 3 Ph, 50 Hz (1.6 kVA, 16 A)
completely in the standard version:
- Solid, torsion-free steel frame,
in welding and bolted
- Press the side beams with continuous pressure surface
with 25 mm thick, coated platen
- Counter-pressure surface (pressure side wall, floor)
25 mm thick, coated, druchgehende
platens
- Electromotive adjustment of the clamping bar
about Precision Lead Screws
(with increased pitch and concentricity)
and high-performance running nuts with grease reservoir
- The clamping is done by an electric motor, via
Worm gear motor (0.75 kW)
- The pressing force of the press bar is by
Potentiometer adjusted continuously electronically
and is controlled by frequency, so
the pressing force regulation no wear and tear
- Press force for vertical clamping bar
min. 300 daN (kg) continuously up to max. 2200 daN (kg)
- Press and adjustment of the clamping bar
with fine positioning, 3-step switch
5/10/25 mm / sec.
- Easy to operate 2 separate pushbutton,
2 movements (opening / closing) are
the control available
- Freely adjustable time delay press with automatic opening
0-30 min. (switchable seconds or hours)
- Working height / loading height 200 mm
- Work dimensions:
Length min. 150 mm, max. 1300 mm
Height min. 150 mm, max. 2500 mm
Depth 700 mm
Order no 0750A001B
ex works
Contact seller
Kirchner GmbH
Nikolaus-Fey-Str. 1797447 Gerolzhofen Phone: 09382 9791 0Fax: 09382 9791 79
