Boring mills / Machining Centers / Drilling machines - Machining Center - Horizontal - STARRAG-HECKERT HEC 800 ATHLETIC

Machining Center - Horizontal

STARRAG-HECKERT HEC 800 ATHLETIC

Stock number:
1118-1619 
Year / Condition:
2009 
Control unit:
CNC (FANUC Series 31i Model A5)
Country of origin:
Germany 
Freight basis:
ex location 
Item location:
FCA  
Delivery time:
promptly 

Picture / documents / videos

Technical specs

Details

x-travel:
1450 mm
y-travel:
1300 mm
z-travel:
1300 mm
control:
FANUC Series 31i Model A5 
NC rotary table:
360  °
Max Workpiece size (Ø x height) :
Ø 1.750 x 1.400 mm
max. table load:
2.000 kg
pallet size::
800 x 1.000 
numbers of pallets:
feed range in X-Y-Z-axis:
1-60.000 mm/min
Feed force in X-Y-Z axis :
20/18/20  kN
Rapid traverse rate in X-Y-Z axis:
60 m/min
Rapid traverse B axis (NC - rotary table):
60 m/min
main spindle :
spindle diameter in front bearing:
100 mm
Max. Power, ED 100/60%:
37/45 kW
Max. Torque, ED 100/60%:
1.230/1.500 Nm
spindle speeds::
6.000 - 2 Getriebestufen  min-1
tool taper:
HSK-A 100 DIN 69893 
tool magazine, tool changer:
number of tools:
180 in 3 Türrmen  
max. tool diameter Ø:
110 mm Nebenplatz belegt  mm
max. tool diameter:
250 mm Nebenplatz frei  mm
weight of tools max.:
35 kg
tool length - max.:
450/ 800  mm
Tool weight max.:
600  kg
Chip-to-chip time up to 12kg / over 12kg:
ca. 5,0 /ca. 8,2  sec
change time of pallets:
20 sec
coolant device:
Cooling lubricant unit with filter, two circuits:
Low pressure circuit supports coolant via outer spindle ring :
- l/min
Low pressure circuit:
ca. 2,5 bar - ca. 125 l/min
Internal cooling through the spindle centre:
ca. 80 bar - ca. 30  l/min
dimensions of the machine ca.:
8,2 x 6,0 x 4,6 m
weight of the machine ca.:
31 t

Description

Equipment, Accessories
·2-fold pallet changer without working space protection
·3 separate set-up stations with threaded hole pallets 800 x 1,000 mm
·Tool magazine with 165 places HSK-A 100, own operating terminal on the magazine side, make SIEMENS
·NC rotary table, increment 0.001
·Main spindle 6,000 min-1, 2 gear steps
·3D measuring probe make RENISHAW
·Electronic handwheel
·Machine enclosure with completely closed working area
·Chip conveyor, ejection under floor

·Program running hours approx. 18,200 h


Contact seller

FLECKENSTEIN Werkzeugmaschinen GmbH

FLECKENSTEIN Werkzeugmaschinen GmbH

Sommerweg 1563831 Wiesen Phone: +49 (0)609697060Fax: +49 (0)6096970620 

 Google Maps

I agree that my personal data will be collected and processed to answer my request. Your data will be deleted after the processing of your request. Note: You can revoke your permission and have all of your data deleted by contacting this address: infomachinestockcom. Detailed information on handling personal data can be found in our data privacy policy

Further machines of this dealer