Ausbohrmaschine

Details

Bohrdurchmesser:

450 mm

Spitzenhöhe:

4500 mm

Bohrtiefe:

6000 mm

Spitzenweite:

13900 mm

Maschinengewicht ca.:

140 t

Beschreibung

CNC Heavy Duty WALDRICH SIEGEN
Line boring bar lathe for casings

-Make: Waldrich - Siegen - Germany
-Type: HB 4500 x 100 NC x 6000
-Age: 1977
-No: 16040

-Minimum turning Ø: 320
-Maximum turning Ø: 4.500
-Max. travel X on bed: 6.000
-Work piece load: 100.000 KG

-Boring bar bed width: 1.900
-2 bed way Bed length: 9.000
-Drive power : 75 kW

-Speed 1 drive: 0,5 - 9 - 32 Rpm
-Speed 2 drive: 1,6 - 30 - 104 Rpm
-Torq on boring bar 7.000 kpm

-Feed in X travel : 0,05 - 100 mm/min.
-Rapid in X travel: 100 - 3.000 mm/min.
-Travel boring bar on bed : 3.500 mm
Guiding Hydrostatic

-Drive facing job feed: 0,05 - 50 mm/min.
-Drive facing job rapid: 50 - 300 mm/min.

-Boring bar Ø 450
-Inside Ø : 325
-Length : 13.900
-Split able in 2 pieces
-2 drives
-To 1e drive = 4.900 to 2e drive from 1e = 3.000



-Boring bar Ø 300
-Inside Ø : 205
-Length : 12.400
-Split able in 2 pieces
-2 drives
-To 1e drive = 4.400 to 2e drive from 1e = 2.500

-Fixed Boring bar steady rest on X travel bed
-Length : 660
-4 x hydrostatic ring bearing
-2 x ring support bar Ø 450 + Ø 300
-Travel on lower bed : 3.700 mm
-Travelling speed : 1.000 mm/min.

-Movable Boring bar steady rest II
-Length : 1.200
-4 x hydrostatic ring bearing
-2 x ring support bar Ø 450 + Ø 300
-Travel on lower bed : 3.700 mm
-Travelling speed : 1.000 mm/min.

-Movable Boring bar steady rest III
-Length : 660
-2 x hydrostatic ring bearing
-2 x ring support bar Ø 450 + Ø 300
-Travel on lower bed : 1.000 mm
-Travelling speed : 1.000 mm/min.

-2 Guide way Bed for steady rest II & III
-Bed width: 2.600
-Length: 7.000
-Thickness: 400

-Int. Boring bar heads for Ø 450 No.1
-Tool holder 1460 - 640
-Tool holder 2540 - 720
-Tool holder 3620 - 800
-Stroke max. 90

-Int. Boring bar heads for Ø 450 No.2
-Tool holder 1780 - 1.020
-Tool holder 2860 - 1.100
-Stroke max. 120

-Int. Boring bar heads for Ø 450 No.3
-Tool holder 11.020 - 1.420
-Tool holder 21.100 - 1.500
-Stroke max. 200



-Ext. Boring bar heads for Ø 450 No.4
-Tool holder 11.450 - 1.850
-Tool holder 21.800 - 2.200
-Stroke max. 200



-Ext. Boring bar heads for Ø 450 No.5
-Tool holder 12.150 - 2.950
-Tool holder 22.500 - 3.300
-Stroke max. 400


-Int. Boring bar heads for Ø 300 No.1
-Tool holder 1310 - 430
-Tool holder 2390 - 510
-Tool holder 3470 - 590
-Stroke max. 60

-Int. Boring bar heads for Ø 300 No.2
-Tool holder 1680 - 780
-Tool holder 2660 - 860
-Stroke max. 100

-Int. Boring bar heads for Ø 300 No.3
-Tool holder 1840 - 1.220
-Tool holder 2 920 - 1.300
-Stroke max. 190

-Ext. Boring bar heads for Ø 300 No.4
-Tool holder 11.250 - 1.650
-Tool holder 21.600 - 2.000
-Stroke max. 200

-Many boring bar tool Quadratics
-Rebuild to NCT in ca. 2000
-Precision 0,001 mm over NC










Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!