Spindle moulders with tiltable spindle

Description

- NEW -
manufactured by Hofmann
Type TFS 1260

- Solid cast iron design of the machine stand , stand in
Integrated accessory tray , tool tray
Planed heavily ribbed cast iron table , very fine -
- Slide table : about setting screw drive , including
Table use of aluminum with hardcoat coating for
Tools up to Ø 250 mm with quick release and interim use
( not rotatable spindle fence ) to quickly adjust
- Interchangeable table insert , made ??of aluminum with hard-coat coating ,
up to Ø 160 mm and Ø 160 to Ø 250 mm
- Cone of spindle HSK F63 , Duo arbor Ø 30 x 140 mm
- Electric height adjustment of the milling spindle 145 mm
Rapid and creep speed , display of 1/10 mm
- Electric tilt adjustment from - 60 ° to + 60 °
Rapid and creep speed , display to 0.1 °
- Electrical depth adjustment of the milling spindle 125 mm
in rapid and creep speed , LED display to 1/10 mm
- Variable speed control from 1,500 to 10,000 rpm direct drive
- Speed ??selection by tapping the stored 10 speeds or
variable typing on keyboard - without changing belts
- Controls the dashboard top
- Double-sided swivel assembly storage in segment 2 guides
- Efficient 2601 router stop type with total adjustment via handwheel
Digital Counters and Backenfeineinstel -ment over the running shoe
Cylinder knob , with vernier. Rotated 360 ° ; cast stop jaws 500/500 mm
with holder for safety rulers and molding board . Tool diameter max. 250 mm.
- Adjustable fence fixed on the machine table , infeed jaw adjustment to
Digital Filter counter to the nearest 0.1 mm, adjustable from the operator side ;
Iron fence stop every 500 /500 mm
- Electric spindle lock ( prevents accidental activation )
- Machines with fused plug socket for feeder with
Ein-/Austaster in the machine control panel
- Machine maintenance
- HOFMANN milling guard " Centrex " , Arch milling guard FRS 95 for milling
the thrust ring with suction
- 2 Suction connector Ø 120 mm Minimum air flow 24 m³ / min. pa at 370 ;
the abutment and the table below
- Forward via two-hand operation with warning indicator
- Electrical equipment according to VDE / EN 60204 with main switch , emergency stop button,
Motor protection and winding protection , undervoltage protection , contact for driving
the exhaust, brake device
- Accessories: operating tools, grease gun , instructions
- Packing: wrapped with stretch film machine , bare parts with
moisture protection
- Finish: white , gray agate , signal blue
- CE-compliant
- BG- wood dust test

* Temporary data until delivery; Subject to change

Specifications:
Table width 815 mm
Table length 1250 mm *
Table height 890 mm
Opening table use D to 250 mm
Swivel range - 60 ° to + 60 °
Spindle D * 30 mm
Useable * 140 mm
Depth adjustment screw 125 mm
Height adjustment spindle max. 150 mm
Tripod height adjustment function ( optional) 0-175 mm
* Motor power 7.5 kW (direct drive) **
Speeds * 1500-10000 (infinitely ) r / min.
Suction -D ( 2x) 120 mm
Minimum air flow 1440 m3 / h
Weight 950 kg
positioning depth 1195 mm

* Information in the standard , expandable

Through ** direct drive significantly more torque on the spindle compared
to belt drives , high- FU allows S6 - which grants
continuous operation with intermittent load with a power of 10.5 kW

*** Temporary data until delivery; Subject to change

ex works


- NEW -
manufactured by Hofmann
Type TFS 1260

- Solid cast iron design of the machine stand , stand in
Integrated accessory tray , tool tray
Planed heavily ribbed cast iron table , very fine -
- Slide table : about setting screw drive , including
Table use of aluminum with hardcoat coating for
Tools up to Ø 250 mm with quick release and interim use
( not rotatable spindle fence ) to quickly adjust
- Interchangeable table insert , made ??of aluminum with hard-coat coating ,
up to Ø 160 mm and Ø 160 to Ø 250 mm
- Cone of spindle HSK F63 , Duo arbor Ø 30 x 140 mm
- Electric height adjustment of the milling spindle 145 mm
Rapid and creep speed , display of 1/10 mm
- Electric tilt adjustment from - 60 ° to + 60 °
Rapid and creep speed , display to 0.1 °
- Electrical depth adjustment of the milling spindle 125 mm
in rapid and creep speed , LED display to 1/10 mm
- Variable speed control from 1,500 to 10,000 rpm direct drive
- Speed ??selection by tapping the stored 10 speeds or
variable typing on keyboard - without changing belts
- Controls the dashboard top
- Double-sided swivel assembly storage in segment 2 guides
- Efficient 2601 router stop type with total adjustment via handwheel
Digital Counters and Backenfeineinstel -ment over the running shoe
Cylinder knob , with vernier. Rotated 360 ° ; cast stop jaws 500/500 mm
with holder for safety rulers and molding board . Tool diameter max. 250 mm.
- Adjustable fence fixed on the machine table , infeed jaw adjustment to
Digital Filter counter to the nearest 0.1 mm, adjustable from the operator side ;
Iron fence stop every 500 /500 mm
- Electric spindle lock ( prevents accidental activation )
- Machines with fused plug socket for feeder with
Ein-/Austaster in the machine control panel
- Machine maintenance
- HOFMANN milling guard " Centrex " , Arch milling guard FRS 95 for milling
the thrust ring with suction
- 2 Suction connector Ø 120 mm Minimum air flow 24 m³ / min. pa at 370 ;
the abutment and the table below
- Forward via two-hand operation with warning indicator
- Electrical equipment according to VDE / EN 60204 with main switch , emergency stop button,
Motor protection and winding protection , undervoltage protection , contact for driving
the exhaust, brake device
- Accessories: operating tools, grease gun , instructions
- Packing: wrapped with stretch film machine , bare parts with
moisture protection
- Finish: white , gray agate , signal blue
- CE-compliant
- BG- wood dust test

* Temporary data until delivery; Subject to change

Specifications:
Table width 815 mm
Table length 1250 mm *
Table height 890 mm
Opening table use D to 250 mm
Swivel range - 60 ° to + 60 °
Spindle D * 30 mm
Useable * 140 mm
Depth adjustment screw 125 mm
Height adjustment spindle max. 150 mm
Tripod height adjustment function ( optional) 0-175 mm
* Motor power 7.5 kW (direct drive) **
Speeds * 1500-10000 (infinitely ) r / min.
Suction -D ( 2x) 120 mm
Minimum air flow 1440 m3 / h
Weight 950 kg
positioning depth 1195 mm

* Information in the standard , expandable

Through ** direct drive significantly more torque on the spindle compared
to belt drives , high- FU allows S6 - which grants
continuous operation with intermittent load with a power of 10.5 kW

*** Temporary data until delivery; Subject to change

ex works