Horizontal slot mortising machine
Typ LB 760-S
- Stock number:
- 2004-28171 TB
- Year / Condition:
- * / Gebraucht
- Control unit:
- conventional
- Country of origin:
- Freight basis:
- Item location:
- Delivery time:
Picture / documents / videos
Technical specs
Description
- NEW -
manufactured by Hofmann
Type LB 760-S
Planed heavily ribbed cast iron table , very fine -
- Table including retractable workpiece stop ,
adjustable to 3 heights
- Pushbutton circuit for automatic start and stop
- Chuck of choice ( at no extra charge ) :
Drill chuck with protective sleeve (range 1-20 mm) or
Collet Chuck (range 2-25 mm ) incl collet D 10 mm
( Collet with high precision , wear-free )
- Drill motor in smooth-running , hardened linear guides ;
adjustable in width by 300 mm and 150 mm in depth to
- Rotational speed of the spindle 1,500 / 3,000 r / min .
pole-changing two-speed
- Height adjustment of the drilling unit by 150 mm by handwheel with
digital display accurate to 0.1 mm
- Depth stop with scale
- Adjustable side stop with center stop
- Frame anchor stop 5 -fold reversible, with hardened bushings
- 1 Eccentric
- Pin drilling device with fine adjustment lever to the detent
(Pitch : 16 - 22-25 - 32 mm )
- Hood with ergonomic design for clear view of the workpiece
- Driving device
- Power cable 5 m
- Electrical equipment according to VDE / EN 60204 with main switch, emergency stop switch ,
Motor protection switch and coil protection , undervoltage protection
- Accessories: operating tools, operator manual
Specifications:
Table width 350 mm
Table length 760 mm
Width 300 mm travel
Travel Depth 150 mm
Travel height 150 mm
swivel range °- 45,5 - 0 - + 45,5
Division -size rotor group * 16-22 - 25 - 32 mm
Motor power 1,4 / 1,8 kW
1,500 rpm / 3000 rpm / min.
Suction connector Ø 120 mm
Weight 300 kg
Space 1295 x 1180 mm
* Information in the standard , expandable
factory
- NEW -
manufactured by Hofmann
Type LB 760-S
Planed heavily ribbed cast iron table , very fine -
- Table including retractable workpiece stop ,
adjustable to 3 heights
- Pushbutton circuit for automatic start and stop
- Chuck of choice ( at no extra charge ) :
Drill chuck with protective sleeve (range 1-20 mm) or
Collet Chuck (range 2-25 mm ) incl collet D 10 mm
( Collet with high precision , wear-free )
- Drill motor in smooth-running , hardened linear guides ;
adjustable in width by 300 mm and 150 mm in depth to
- Rotational speed of the spindle 1,500 / 3,000 r / min .
pole-changing two-speed
- Height adjustment of the drilling unit by 150 mm by handwheel with
digital display accurate to 0.1 mm
- Depth stop with scale
- Adjustable side stop with center stop
- Frame anchor stop 5 -fold reversible, with hardened bushings
- 1 Eccentric
- Pin drilling device with fine adjustment lever to the detent
(Pitch : 16 - 22-25 - 32 mm )
- Hood with ergonomic design for clear view of the workpiece
- Driving device
- Power cable 5 m
- Electrical equipment according to VDE / EN 60204 with main switch, emergency stop switch ,
Motor protection switch and coil protection , undervoltage protection
- Accessories: operating tools, operator manual
Specifications:
Table width 350 mm
Table length 760 mm
Width 300 mm travel
Travel Depth 150 mm
Travel height 150 mm
swivel range °- 45,5 - 0 - + 45,5
Division -size rotor group * 16-22 - 25 - 32 mm
Motor power 1,4 / 1,8 kW
1,500 rpm / 3000 rpm / min.
Suction connector Ø 120 mm
Weight 300 kg
Space 1295 x 1180 mm
* Information in the standard , expandable
factory
Contact seller
Kirchner GmbH
Nikolaus-Fey-Str. 1797447 Gerolzhofen Phone: 09382 9791 0Fax: 09382 9791 79