Table Type Boring and Milling Machine

Details

spindle diameter:

110 mm

x-travel:

2.000 mm

y-travel:

1.600  mm

max.roll thread.length in through put process:

1.500 mm

w-travel:

550 mm

B-Axis, rotary movement table:

360 Grad/degrees

b-axis, positioning accuracy :

360.000 x 0,001 °

workgin unit: :

- 

spindle diameter:

110 mm

fixed spindle nosing, length:

300 mm

Fixed spindle nosing, diameter:

260 mm

spindle taper (short taper acc. to DIN 69871):

SK 50 

Drive power S1 (100%) / S2 (30min):

22/27  kW

max. torque at the spindle:

2.012 Nm

Spindle speed range:

5 - 3.000 min-1

NC-rotary table :

- 

surface area:

1.600 x 1.250 mm

center hole in table:

100 mm H6 

table load (max.150mm outside table center):

6.000 kg

width of T-slots:

22 mm

T-slot width:

125 mm

position :

360.000 x 0,001 °

Feeds and rapid traverse::

- 

Max. Feed range for X-, Y-, Z- and W-Axis:

1- 6.000 mm/min

Max. B axis working torque:

10.000 Nm

Rapid traverse B axis (NC - rotary table):

3 m/min

tool magazin::

- 

magazine type:

Kettenmagazin 

Number of tools:

40 

max. tool-Ø adjacent slots occupied:

125 mm

max. tool-Ø adjacent slots occupied:

250 mm

max. tool length :

500 mm

max. tool weight:

30 kg

Max. permissible weight of all tools:

800 kg

max. tilting moment:

50 Nm

Data for electrical installation:

- 

voltage:

3~ 400/230  V

50 Hz

connected load:

63 kVA

Fuse:

125 A

Machine dimensions:

- 

Description

Accessories
Machine enclosure -NEW-
Operating mode 3
3 pcs. chip conveyors (position left and right as well as front crosswise in front of the machine bed) - NEW
Coolant system for internal & external cooling 20 / 8 bar -NEW-
Tool magazine 40 places, automatic change

Scope of retrofit
· Ball screws in X, Y, Z and W axis, incl. new bearings - NEW
· Linear guides and roller shoes in X, Y, Z and W axis - NEW
· Tool changer and magazine overhauled
· Bearings for spindle and quill - NEW
· CNC control HEIDENHAIN iTNC 530 -NEW from our stock-
· Tool clamping unit make OTT overhauled by manufacturer
· Measuring systems cleaned, checked and partially replaced by new components
· Machine completely checked mechanically and electrically
· Largely new cables, especially in the energy chains
· Energy chains - NEW
· Telescopic covers overhauled
· Bellows in the vertical axis - NEW
· Machine painting with oil-resistant and abrasion-resistant two-component paint - NEW
· 2 pcs. lubrication units - NEW
· 2 pcs. High pressure units make HAWE - NEW
· Oil-cooling device make HYDAC for main-gearbox - NEW
· All mechanical and electrical components have been checked and renewed if necessary

Set-up, installation and functional commissiong
Scope of services: - Positioning the machine bed on the prepared foundation - Preliminary adjustment of the machine bed for casting/drilling - Geometric fine straightening of the machine bed after the casting/drilling - Assembling and mounting of all machine components - Connection of all electrical, hydraulic and pneumatic lines - Completing the machine enclosure - Installation of the machine enclosure - Commissioning of the machine system with functional test run - Calibration of the machine geometry - Checking of the measuring systems by means of laser with subsequent compensation - Handover of the machine to your production