Presses - Four Column Press - Hydraulic - INO 400T PH4C 1600x1300mm

Four Column Press - Hydraulic

INO 400T PH4C 1600x1300mm

Stock number:
1358-GEKO-101 
Year / Condition:
2000 / Overhaul on request 
Control unit:
PLC 
Country of origin:
Germany 
Freight basis:
ex works 
Item location:
Germany 
Delivery time:
on appointment 

Picture / documents / videos

Technical specs

Details

pressure:
400 t
passage width:
1600 x 1300 mm
stroke:
800 mm
total power requirement:
ca. 60 kW
weight of the machine ca.:
40 t
tracking travel:
130 / 60 ms
capacity of oil tank:
ca. 1500 L
Table size:
1600 x 1300 mm
open height:
1200 mm
height over floor:
6200 mm
Press speed:
0,5 - 10 mm/sec
feed up:
stufenlos einstellbar bis 350 mm/sec
Number of pressing cylinders:
4 Stk.
number of driving cylinders:
4 Stk.
socket Schuko 10 A:
1 Stück
light curtain Lumiflex:
1350 mm

Additional information

T-slots in table and plunger according to DIN 650-22
required Hall height min.
Safety standard DIN/EN 693
green warning light = press open and secure
yellow warning light = in function
red flashing warning light = fault

Features

Interior lighting
Lockable operating mode switch
Siemens S7 CPU 314
warning lamps

Description

Description of the press frame
The frame is designed as a frame construction with 2 operating sides. It consists of highly dimensioned braces, which are tightly and rigidly welded with upright steel ribs. The complete welding part is processed on precision machines.
As a stiff box construction. The underside of the box is formed by a solid welded steel plate, which is prepared for the assembly of insulation and heating plates. The complete welding part is processed on precision machines.
Integrated guide and cylinder connections in a power optimised design.
Plunger Guide The plunger is guided diagonally through a prism guide, i.e. the angle of the guide is designed so that the contact surfaces run parallel to the diagonals of the press table.
This arrangement guarantees a consistent guiding game, as the guide surfaces move along their line of gravity at temperature differences of the frame and plunger. The design of the guide is completely force-and form-fit, so that no torque or force is applied to the fastening of the guide jaws. This means that the guide can be adjusted very precisely and works with high accuracy. The length of the guide is chosen in relation to the width of the table so that it can be dispensed with.
The sliding pairing is special bronze against steel. Lubrication is carried out via lubricant generator.
Hydraulic unit the hydraulic system is located in the upper part of the press frame. It is completely piping, connected and mounted.
The hydraulic unit consists of a high pressure pump with drive motor, as well as all the components required to function the press; In addition, auxiliary and control drives are used.
Proportional valves are installed for the lifting and lowering movements. The short pressure build-up time in connection with the specified press speed leads to the use of a storage station. Appropriate times and cycles in the process must be taken into account when loading the storage station. Details see technical data.
Safety Equipment The press complies with the applicable safety regulations according to UVV, as well as the standards valid for the EU, in the latest version for the scope of delivery described.
2.3 Electric Press Control S7/OP27-The controller is operated on the basis of a PLC manufacturer Siemens (S7) with a Control Panel Siemens op 27.
-The press is FABR with a measuring system. BALLUFF.
-The switch cabinet with control power and safety part is positioned to the right of the press. Max distance to press 5 m

Contact seller

HIDROBRASIL UG

HIDROBRASIL UG

Hertener Strasse 10845892 Gelsenkirchen Phone: 0049-(0)209 88 00 38 43Fax: 0049-(0)3212 88 00 38 4 

 Google Maps

I agree that my personal data will be collected and processed to answer my request. Your data will be deleted after the processing of your request. Note: You can revoke your permission and have all of your data deleted by contacting this address: infomachinestockcom. Detailed information on handling personal data can be found in our data privacy policy

Further machines of this dealer