Planer-Type Milling M/C - Double Column
KRAFT VM2000
- Stock number:
- 1124-100243
- Year / Condition:
- Fabrikneu / New
- Control unit:
- CNC (Heidenhain/Siemens/Fanuc)
- Country of origin:
- China
- Freight basis:
- ex warehouse, free on truck
- Item location:
- China
- Delivery time:
- ca. 4-5 months
Picture / documents / videos
Technical specs
Details
- x-travel:
- 1300 mm
- y-travel:
- 1900 mm
- z-travel:
- 800 mm
- distance spindle nose and table:
- 180~980 mm
- distance between columns:
- 1840 mm
- table-size:
- 1650x1300 mm
- table load:
- 4 t
- T-slot (width-distance-quantity):
- 22x180x7 mm
- spindle cone:
- 50 BBT
- spindle speed:
- 10000 1/min
- spindle drive:
- 15/18,5 kW
- Spindle motor torque:
- 526 NM
- rapid traverse in x-y-z axis:
- 20/20/15 m/min
- feeds:
- 1~10000 mm/min
- Tool changer:
- 24 -fach
- workpiece length:
- 350 mm
- tool diameter:
- 110/220 mm
- weight of tools max.:
- 15 kg
- positioning accuracy:
- 0,020|0,025|0,03 mm
- repeating accuracy:
- 0,015|0,020|0,025 mm
- total power requirement:
- 60 kva
- machine length:
- 4900 mm
- machine width/height:
- 4160×4339 mm
- Weight approx.:
- 18 t
Accerories
- automatic tool changer:
- 24 fach
- Gewindebohren ohne Ausgleichsfutter
- CNC controller:
- Heidenhain/Siemens/Fanuc
- automatic lubrication system
- signal lamp
- 3 chip conveyor
- spindle cooling
- gear box:
- von Barufaldi/Italien
- MPG hand wheel
- foundation bolts and pads
- coolant system
- CE-design:
- gegen Mehrpeis möglich (TUEV)
- inner coolant:
- 30 bar
- fully enclosed
- air conditioner for cabinet
- Oil-coolant separator
- working area light
- transformator
- Automatically power off
- water gun
- pneumatic unit
- chip conveyor - auger:
- im Maschinenbett
- Cutting air blast
- spindle coolant system
Description
Brand new bridget type milling machine with Fanuc from stock with:
The column and the beam were intergraded together to provide the best dynamic rigidity and precision stability.
The worktable’s length wise is parallel to the beam, create the most suitable length-width ratio.
The spindle was driven by dual gear box from Europe, make sure it has the quickest response time and the lowest vibration.
Extra long X axis travel, easy for customer to add attachment head , extend the working range.
Unique opposite angle two door design with foot rest aside of the worktable makes load and unload the work piece much easier.
German made hanging type operation box with protecting door on the right side, easy for operation and tool change.
Equipped with fully automatic coil type and chain type chip conveyer. Chip collecting point is located at the back of the machine. Efficient, environmental friendly and clean.
The machine is operated via an operator's panel, designed by Sky Master and made in Taiwan.
Contact seller
GK Werkzeugmaschinen GmbH
Lindenstr. 2164589 Stockstadt Phone: + 49 (0) 61 58/8 47 72Fax: +49 615886931