Boring mills / Machining Centers / Drilling machines - Machining Center - Vertical - MATEC 30 HV/K

Machining Center - Vertical


Stock number:
Year / Condition:
Control unit:
Country of origin:
Freight basis:
Item location:
EXW Kleinostheim 
Delivery time:

Picture / documents / videos

Technical specs


1.300 mm
600 mm
800 mm
NC-rotary table:
630 diam./mm
max. torque S1/S4:
270/600 Nm
max. Speed:
80 min-1
embedded in the machine table:
HSK 63 
1.515x635  mm
power on torquemotor:
rotary table directly connected to motor flange:
milling head::
max. torque:
800  Nm
max. Speed:
50 min-1
pitch accuracy:
0,001 °
milling spindle:
30 kW
max. torque:
800  Nm
max. Speed:
15.000 min-1
tool taper :
HSK 63 
max. boring diameter:
diam. ca. 60 mm
Max. Milling-capacity:
ca. 500 cm³
M 30 
feed, rapid traverse:
feed range for X-, Y-, Z- axis:
1-30.000 mm/min
max. feed force X-, Y-, Z-axis:
15.000 N
max. rapid rate X,Y,Z - axis:
30 m/min
rapid feed C-axis (NC-rotary table):
80  U/min
tool magazine, tool changer:
number of places each cassett:
tool taper:
HSK 63 
69893/form A 
Dimensions ca.:
5,3 x 4,4 x 3,4 mm
machine weight ab.:
9.500 kg
Total weight, approx.:
11.500 kg


Equipment & Accessories
•Fully encapsulated working area with openable roof
•direct measuring system in all axes
•chip conveyor
•rinsing gun
•working light
•increased motor power
•electronic handwheel
•Internal coolant through spindle
•coolant equipment manufacturer Mayfran consists of coolant tank 600l,filtration unit, rinsing gun, high pressure pump 20l\min at 70bar, pressure relief valve, switch box for control unit
•compressed air at the outer nozzles
•Internal coolant compressed air through the tool
•Oil mist extraction system
•Electrostatic air filter, vertical, with motor and blower, air capacity approx. 1.000 m³\h, total power 300W
•3D-measuring probe with radio signal transmission
•hydraulic unit 400bar
•pneumatic connection with maintenance unit

The vertical machining center Matec 30HV/K in performance class HSK-A 63 is equipped with a Heidenhain iTNC530 control. The short version of this vertical center has a swivelling spindle head and a rotary table with a diameter of 630 mm integrated into the worktable. The selected axis arrangement therefore permits full 5-sided machining. The reinforced main spindle with a drive power of 30 kW and the tool changing system with 46 seats round off the top end of the performance package.

Contact seller

FLECKENSTEIN Werkzeugmaschinen GmbH

FLECKENSTEIN Werkzeugmaschinen GmbH

Sommerweg 1563831 Wiesen Phone: +49 (0)609697060Fax: +49 (0)6096970620 

 Google Maps

I agree that my personal data will be collected and processed to answer my request. Your data will be deleted after the processing of your request. Note: You can revoke your permission and have all of your data deleted by contacting this address: infomachinestockcom. Detailed information on handling personal data can be found in our data privacy policy

Further machines of this dealer