Grinding machines - Surface Grinding Machine - BLOHM PLANOMAT 608

Surface Grinding Machine


Stock number:
Year / Condition:
Control unit:
Country of origin:
Freight basis:
Item location:
EXW Kleinostheim 
Delivery time:
immediatly available 

Picture / documents / videos

Technical specs


grinding length:
800 mm
grinding width:
600 mm
Max. distance table to spindle axis:
700 mm
max. table load:
800 kg
Table clamping area with additional space :
1.200 x 600 mm
Table travel longitudinal max.:
900 mm
Table speed:
30 - 3.000/300 - 30.000 stufenlos regelbar  mm/min
grinding path adjustment :
Über Setztasten im Bedienpult 
guidance system:
Vorgespannte Wälzführungen 
Table drive :
Servo-Motor mit Kugelgewindetrieb 
manual table adjustment:
Über Joy-Stick am Bedienpult 
measuring system:
0,001 mm rotatorisch 
Max. distance table to spindle axis:
700 mm
rapid traverse:
3.750 m/min
guidance system:
Vorgespannte Wälzführungen 
drive system:
Servomotor mit Kugelgewindespindel 
measuring system:
0,001 mm rotatorisch 
automatic cross movement:
max. 560  mm
crossing path automatic:
40 - 4.000 stufenlos  mm
rapid traverse:
4.000  mm/min
guidance system:
Vorgespannte Wälzführungen 
drive system:
Servomotor mit Kugelgewindespindel 
measuring system:
0,001 mm rotatorisch 
Grinding spindle speed max.:
3.400 1/min
Electric capacity:
15 kW
max. measures grinding wheel (DA x B):
400 x 80  mm
inner bore:
127  mm
Constant peripheral speed:
35 m/sec
Max. Peripheral speed:
45 m/sec
Abrichtbetrag wird autom. kompensiert 
connected load:
19 kVA
400 V
mains frequency :
50 Hz
weight of the machine ca.:
4900 kg
dimensions of the machine ca.:
4,6 x 4,2 x 2,45  m


BLOHM Grinding control ERGOMATIC
Movable setup console in the middle of the machine:
Electronic handwheels for conventional operation of the machine for axes Y and Z.
Joy stick for the axes X and Z.
Feed control per axis via potentiometer, also active during program run.

Control panel on support arm on the right side of the machine:
LC display, visible area 121 x 103 mm, with backlight
Membrane keyboard with short-stroke keys for acknowledging recommended default values or for entry of freely selectable parameters with the following functions:
- Loading position X and Z axis
- Set or change reversing points during the program
- Set zero points for Y and Z axis
- Set safety position
- Set grinding wheel data
- Select dressing function
Softkey for preselection measuring system metric / inch
Info button for help texts and service instructions
Display for operating hours and maintenance intervals

Fixed programs for workshop-related, operator-friendly handling:
- Reciprocating loops with automatic Y-feed
- Longitudinal, circumferential and surface grinding with intermittent or continuous crossfeed
and automatic Y positioning
- Grinding wheel adjustment with handwheel or automatic
- ECO loops with automatic Y positioning:
1st layer: plunge grinding "roughing"
2nd layer: Surface grinding "finishing"
3rd layer: surface grinding "fine finishing"
Automatic Y positioning: 3 layers with dressing, 10 parameter sets for 10 delivery programs storable, allowance or finished dimension grinding preselectable.

Dressing programs:
- Straight dressing from the table with compensation by single diamond, foldable dressing unit.
- face dressing with single diamond or foldable dressing unit.
- Dressing with compensation by automatic straightening device.
- Deep dressing with compensation by PEA-T100.

Coolant cleaning equipment

Coolant system with belt filter (tank capacity 1,400 l) consisting of: - Belt filter with a cleaning surface of 2.25 m² for a flow rate of 250 l / min - Supply pump 200 l / min, 4 bar - Additional pump for water trough flushing and rinsing gun - Cooling unit for coolant emulsion with max. 5% grinding concentrate - Power 4.9 kW (4,200 kcal / h), refrigerant CFC-free

-Basic machine with work enclosure closed at the top
-Spindle drive 15 kW, frequency controlled
-Manual balancing device MPM incl. Vibration sensor and speed sensor
-Belt filter coolant cleaning system Tank capacity 1,400 liters
-Pneumatically folding dressing unit
-Electro-permanent magnetic clamping plate 800 x 600 mm, transverse pole pitch 4 mm, with 8-fold adhesion control
-2 pieces of grinding wheel flanges
-1 pc. balancing mandrel
-Machine documentation incl. CE conformity declaration
-Finish: RAL 5009 azure / RAL 9002 gray white
Grinding spindle insert renewed 02-2016

Contact seller

FLECKENSTEIN Werkzeugmaschinen GmbH

FLECKENSTEIN Werkzeugmaschinen GmbH

Sommerweg 1563831 Wiesen Phone: +49 (0)609697060Fax: +49 (0)6096970620 

 Google Maps

I agree that my personal data will be collected and processed to answer my request. Your data will be deleted after the processing of your request. Note: You can revoke your permission and have all of your data deleted by contacting this address: infomachinestockcom. Detailed information on handling personal data can be found in our data privacy policy

Further machines of this dealer