Injection molding machine up to 1000 KN
ARBURG 470 H 1000-800 Hi-Drive
- Stock number:
- 1102-20336
- Year / Condition:
- 2012 / used
- Control unit:
- other (Selogica)
- Country of origin:
- Germany
- Freight basis:
- ex works
- Item location:
- Delivery time:
- about 3-4 weeks
Picture / documents / videos
Technical specs
Details
- screw size:
- 55 mm
- injection shot weight in Polysterol:
- 434 g/PS
- closing pressure:
- 1000 kN
- daylight:
- 470 x 470 mm
- control:
- Selogica
- weight of the machine ca.:
- 5,5 t
Description
operation hours pump about: 23.255
operation hours automatic: 19.861
version Hi drive
- highly wear-resistant plastification unit
- Standard screw coupling with larger two-edged screw drive
- Selogica control direct with sequence editor and touchscreen operation
- Drive unit with:
- Drive motor 11 kW
- Pump combination with 21.4 l/min. Loading volume flow and separate cooling circuit
- with hydraulic accumulator for high speeds
- Servo-electric mold height adjustment with automatic clamping force regulation
- mould blow unit 1 with pressure reducer
- Connection / electrical preparation for retrofitting
of mould blow unit 2
- regulated hydraulic ejector with moveable mould plate
- continuous oil circulation with additional pump for optimized cooling and filtration
- interface for robot according to EUROMAP 67
- interface for printer
- compact Flash and USB interface for data set storage
- Operating authorization with chip card according to EUROMAP 65
- AED - electromechanical dosing drive
- simultaneous injection together with mould closing
- 3 electrical heating circuits for mould heating
- Cooling water distribution with 8 free circuits, manually adjustable
- Basic equipment for additional cooling water distributor with separate inlet and outlet
- 7 free cooling circuits for second cooling water distributor
- programmable control of machine-related cooling circuit
- Arburg equipment packages No. 1,2,3,5,6,7
- aXw Control ScrewPilote
- Ejector quick release coupling
- Control cabinet water-cooled via heat exchanger
- Protective device open at the top
- Control extension for additional signals
- Plastic screw CrNitrated
- 8 cooling water circuits routed to fixed mould plate
- 6 cooling water circuits routed to the movable mould plate
This machine will be cleaned and functionally tested in our house. After the functional test, the machine can be tested by us while it is still running.
