Strip Straightening Machine
MÜLLER WEINGARTEN
- Stock number:
- 1048-7-40263
- Year / Condition:
- Control unit:
- other (SIEMENS S7)
- Country of origin:
- Freight basis:
- EXW 'as is where is'
- Item location:
- Freudenberg
- Delivery time:
- immediate
Picture / documents / videos
Technical specs
Details
- sheet width:
- 2000 mm
- plate thickness:
- 1.8 mm
- Controls:
- SIEMENS S7
- PRESS DESIGN:
- .
- - frame design : H-frame :
- .
- - openings in uprights : yes :
- .
- - opening in table : yes :
- .
- - moving bolster : yes :
- .
- PRESS TABLE:
- .
- - clamping surface (left-right):
- 2800 mm
- - clamping surface (front-back):
- 2800 mm
- - height above floor level:
- 375 mm
- RAM:
- .
- - ram force:
- 800 to
- - clamping surface (left-right):
- 2800 mm
- - clamping surface (front-back):
- 2800 mm
- - stroke:
- 350 mm
- - number of strokes max:
- 55 /min
- RAM (MECHAN. PRESS):
- .
- - ram adjustment:
- 350 mm
- TOOL ASSEMBLY DIMENSIONS:
- .
- - shut height (stroke down, adjustment up):
- 1100 mm
- - distance between columns (H-frame):
- 3100 mm
- - Free passage between side columns (width):
- 2560 mm
- - Free passage between side columns (height):
- 1500 mm
- DECOILER:
- .
- - design : single coil :
- .
- - sheet width max:
- 2000 mm
- - sheet width (min):
- 400 mm
- - max. weight of coil:
- 30 to
- - max. diameter of coil:
- 2000 mm
- - min. internal diameter of coil:
- 610 mm
- LEVELER UNIT:
- .
- - sheet width max:
- 2000 mm
- - sheet width (min):
- 400 mm
- - sheet thickness max:
- 1.8 mm
- - sheet thickness (min):
- 0.6 mm
- - number of leveler rolls:
- 13
- - diameter of leveler rolls:
- 50 mm
- FEEDERS:
- .
- - feeder: type : roll feeder :
- .
- - sheet width max:
- 2000 mm
- - sheet thickness max:
- 2 mm
- - feeding step max.:
- 4000 mm
- ELECTRICAL SPECIFICATIONS:
- .
- - mains power supply:
- 400 kVA
Description
Technical description :
SCOPE OF DELIVERY/ COMPONENTS:
- Coil carrier with separate crop shear
- single sided de-coiler,
- max coil width 2000mm, max weight 30tons
- Two exchangeable straightening units ( cassette type ) with 13 straightening rolls,
max blank thickness 1.8mm, max. blank width 2000mm
- Loop pit
- Roll feeder with roll diameter 220 mm, feed length max 4000mm
- Monitoring of oil film thickness via scanner
- Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983)
* with max. 55 strokes per minute
* Table dimensions (clamping surface 2800 x 2800 mm
* 2 Changing tables
and 350mm stroke travel
- FIRST NSM Blank de-stacker unit with 2 unloading stations
- Max. blank dimensions 4000 x 2000mm
- Conveyance speed 30 - 150 meters per minute
- Packet weight max. 12000 kgs
- Packet height max. 650 mm.
(On this part finishing for side panel cutouts via controlled dies)
- SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks.
- max. size 1650 x 800 mm
- max. heigth with pallet = 450 mm.
PERFORMANCE:
240 to 270 tons cut blanks per day in a 3 shift operation
Description of condition :
Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable.
Video at: https://www.youtube.com/watch?v=1_gz2WxMMO0&feature=youtu.be
The complete conveyor system was revised in 2011:
- SEW and Siemens components electronically synchronized: NEW
- Cardan shafts of the straightening system: NEW
- Hinge side guide: Optimized
- Complete electrics and electronics (S7): NEW
- Drive block of the press:
• BEFORE: grease lubrication
• NOW: Circulating oil lubrication
Also:
NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max. blank dimensions of 1650 x 800 mm.
= COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.
Contact seller
Goedicke Werkzeugmaschinenhandels GmbH
Heinz-Nixdorf-Str. 274172 Neckarsulm Phone: +49 - (0)7132 - 999 360Fax: +49 - (0)7132 - 999 3699